Passive Speaker
Sinbosen Polyurea paint K1 dual 15 inch 3 way audio line array speaker
Model: K1
Power Handling: LF 2 x 600W
Components:LF: 2X15" MF: 4X6.5" HF: 3X3''
Frequency Response(-3dB):35Hz-20KHz
MAX SPL: 147dB
Impedance：8Ω
Power Handling: LF 2 x 600W
Components:LF: 2X15" MF: 4X6.5" HF: 3X3''
Frequency Response(-3dB):35Hz-20KHz
MAX SPL: 147dB
Impedance：8Ω
Description
| K1 Specification | |
| Type | K1 3 way audio line array system |
| Usable bandwidth (-10 dB) | 35 Hz – 20 kHz ([K1]) |
| Maximum SPL1 | 149 dB ([K1]) |
| Nominal directivity (-6 dB) | Horizontal: 90° symmetric |
| vertical: dependent upon the number of elements and the line source curvature | |
| Transducers | LF: 2 × 15″ neodymium |
| MF: 4 × 6.5″ neodymium, direct-radiating | |
| HF: 3× 3″ diaphragm compression drivers | |
| Acoustical load | LF: bass-reflex |
| MF: bass-reflex | |
| HF: DOSC waveguide | |
| Nominal impedance | LF: 2 × 8 Ω |
| MF: 8 Ω | |
| HF: 8 Ω | |
| Connectors | IN: 1 x 8-point PA-COM LINK: 1 x 8-point PA-COM |
| Rigging and handling | 4 handles integrated into the cabinet |
| inter-enclosure angles: 0°, 0.5°, 1°, 1.5°, 2°, 2.5°, 3°, 4° or 5° | |
| Cabinet | First grade Russian birch plywood, high density polyethylene Front steel grill with anti-corrosion coating acoustically neutral 3D fabric |
| Rigging components | High grade steel with anti-corrosion coating |
| Finish | Dark Grey brown Pantone 426C |
| Dimension | 134x44x52cm (WxHxD) |
| Weight (net) | 106 kg / 234 lb |
Feature of K1:
Sinbosen K1 Dual 15" 3-Way Audio Line Array Speakers
Made of first grade Russian birch plywood.The surface is coated with polyurea paint, which is anti-corrosion, waterproof and wear-resistant.
Steel grating and Rigging components are also high-grade steel with anti-corrosion coating.
The front is wrapped in acoustically neutral 3D fabric.
Built-in two 600W 15 inch neodymium woofers, four 600W 6.5 inch neodymium midrange and three 220W 3 inch neodymium tweeters!
K1 adds some user-friendly designs like:
The inter-enclosure angles can be adjusted and you can replace speakers without disassembly!
●Insert the angle adjustment pin into the corresponding angle of 0°, 0.5°, 1°, 1.5°, 2°, 2.5°, 3°, 4° or 5°: the cabinet will automatically adjust.
●Waterproof connector! Accessories are also an integral part of the advanced audio system. The seemingly tiny wire accessories are equivalent to the "blood vessels" of the audio!
●Picture order from left to right are: woofer, midrange speaker and tweeter!
 |
 |
 |
 |
 |
 |
