dbx PA 2 in 6 out of professional digital audio processor

Sinbosen BDX PA 2 in 6 out of professional digital audio processor

Model: BDX PA
Type: DSP digital audio processor
Number of Channels: 2 input 6 output
Function: Crossover, EQ, delay, and limiter
Third-party control friendly: yes
Application: Concert, stage, KTV, Home Theatre
Warranty: 2 years
Digital audio processor, 2 input, 6 output;
input processing functions: compression, graphic equalization, AFS feedback, 8-band parametric equalization, secondary chopping synthesizer, delay,
output processing function: limiting, frequency dividing, 8-band parametric equalization, delay; Ethernet interface, combined with wireless router and mobile device, remote control using DriveRackControl application; USB interface, can be used for update.

Input     (2) line inputs. (1) RTA Mic input
Input Connectors     (2) Female XLR line inputs. XLR RTA Mic input
Input Type     Electronically balanced/RF filtered
Input Impedance     >40k ohm
Max Input     >+20dBu
CMRR     > 45dB
Mic Preamp Phantom Power      +15VDC (RTA)
Mic Preamp Equivalent Input Noise (EIN)     < -117dB, 22Hz-22kHz, 150 ohm (RTA)
Output     (6) Line Outputs
Output Connectors     Male XLR
Output Type     Electronically balanced, RF filtered
Output Impedance     120ohm
Max Output      +20dBu
Alignment Delay     10ms per channel (60ms total)
A/D Converter     dbx Type IV™ Conversion System
A/D Dynamic Range     110 dB A-weighted, >107 dB weighted
Type IV Dynamic Range     123 dB with transient material, A-weighted,
 22kHz BW; 121 dB with transient material, 
unweighted, 22kHz BW; 115 dB typical with program material,
 A-weighted, 22kHz BW
Sample Rate     48kHz
D/A Dynamic Range 112 dB A-weighted, 110dB unweighted
Dynamic Range     >110 dB A-weighted, >107dB unweighted
THD+Noise     0.004% typical at +4dBu, 1kHz, 0dB input gain
Frequency Response     20Hz – 20kHz, +/- 0.5dB
Interchannel Crosstalk     < -110 dB, -120dB typical (input-to-output: < -100 dB)
Operating Voltage     100-120VAC 50/60 Hz - EU: 220-240 VAC 50/60 Hz
Power Consumption     25 W
Unit Weight     5.5 lbs. (2.5 kg)
Shipping Weight     7 lbs. (3.18 kg)
Dimensions     1.75" (4.4cm) H x 5.75"(14.6cm) D x 19" (48.26cm) W

✔ Setup Wizard Steps Through Speaker and Amp Selection and Levels
✔ Auto EQ™ Wizard with 28-Band RTA Tunes Your System For The Venue
✔ AFS™ Wizard Helps Eliminate Feedback
✔ Stereo Feedback Elimination with 12 feedback notch filters
✔ 120A Sub-harmonic Synthesizer
✔ Classic Input Compression
✔ JBL® Speaker and Crown® Power Amp Tunings included
✔ Full time RTA function
✔ Front-Panel Output Mutes
✔ Pink Noise Generator (used with Auto EQ and Auto Level Wizards)
✔ Linked Stereo DSP Processing for ease of use
✔ 24-Bit ADC/24-Bit DAC, >113 dB Dynamic Range
✔ 2-Channel XLR Input and 6-Channel XLR Output
✔ 2x3, 2x4, 2x5, 2x6 Crossover Configurations
✔ Dual 28-band Graphic EQ- Linked or Dual Mono
✔ Stereo Multi-band Parametric EQ
✔ Stereo Output Limiters
✔ Output Alignment Delay
✔ Power on/off Mute Circuitry
✔ Front-panel RTA-M XLR input with phantom power
✔ 25 User Programs/25 Factory Programs
✔ Full Graphic LCD Display
✔ Front Panel Input and Output Meters

  FP10000Q SKM9000 BDX 260 DP448  
Contact us for a free mask! Let's fight the Coronaviruss together!
Or Contact us via WhatsApp: +8615815625697 to Quick Quotation!