Product News
The detailed differences between the 3 speaker versions？
Views : 1195
Update time : 2024-05-30 16:52:33
Sinbosen offers customizable line array, full range, and subwoofer speakers. Customers can customize the material, design details, and speakers to meet their specific needs. Depending on whether customers prioritize cost-effectiveness or perfection, different speaker configuration solutions are provided.
Customization is typically divided into three versions, with minimal differences in appearance. The main distinctions lie in the detailed design and speakers.Take the following K-28 dual 18-inch subwoofers as an example：
| K-28 Version 1.0 /2.0 /3.0 Details Compare | |||
| V1.0(Cost-effective version) | V2.0(Middle Version) | V3.0(High End Version) | |
| Driver compare | V1.0 Ferrite Driver 100 cores 220 magnetism↓ |
V2.0 Neodymium driver Binding post connection↓ |
V3.0 Neodymium driver Designed with high quality wiring terminal Speaker cone, coils, Spider↓ |
 |
 |
 |
|
| Speaker cable compare | V1.0 simple and cheap speaker cable↓ |
V2.0 simple and cheap speaker cable↓ | V3.0 speaker cable with code number and wiring terminal↓ |
 |
 |
 |
|
| Speaker interface connection compare | V1.0 connect speaker cable with speakon connector directly↓ |
V2.0 connect speaker cable with speakon connector directly↓ |
V3.0 with buffer management interface. not connect speaker cable with speakon connector directly↓ |
 |
|
 |
|
| Speaker polyurea coating finished compare | V1.0 just has polyurea coating on outside. Inside no with polyurea coating↓ |
V2.0 just has polyurea coating on outside. Inside no with polyurea coating↓ |
V3.0 has Polyurea coating on outdide and inside cabinet↓ |
 |
 |
 |
|
| Speaker cabinet and soundproof cotton compare | V1.0 has thin soundproof cotton. Use normal plywood made in China↓ |
V2.0 has thicker soundproof cotton. Use normal plywood made in China↓ |
V3.0 dont has soundproof cotton The cabinet material is imported from Russian birch↓ |
 |
 |
 |
|
| LOGO position compare | V1.0 simple design not same as original↓ |
V2.0 simple design not same as original↓ | V3.0 with the spring buckle on logo position, same as original↓ |
 |
 |
 |
|
| Yellow and green lable compare | V1.0 has Yellow and green lable↓ |
V2.0 don't has Yellow and green lable↓ | V3.0 has Yellow and green lable↓ |
 |
 |
 |
|
| Speaker handle compare | V1.0 Handle with simple Antivibration↓ |
V2.0 Handle with simple Antivibration↓ | V3.0 has good quality damping strip↓ |
 |
 |
 |
|
| Grille fabric compare | V1.0 with Low-density fabric on Grille. The craft is Rough↓ |
V2.0 with Low-density fabric on Grille↓ | V3.0 with High-density fabric on Grille. The craft is elaborate↓ |
 |
 |
 |
|
| Screws compare | V1.0 |
V2.0 | V3.0 more detail color and length |
 |
 |
 |
|
| Cushion of grille | V1.0 Cushion is inelastic. Grille will vibrate↓ |
V2.0 Cushion is inelastic. Grille will vibrate↓ | V3.0 Cushion is stretchy. Grille will be shock-absorbing↓ |
 |
 |
 |
|
